Miscellaneous - Teejuhid

Spacers - terms explained

Spacers are put in between the bearings in each wheel. Spacers are used in skates, scooters, waveboards and pretty much anything that rolls with beari...

How to Choose Inline Skates & Skates Size Chart

When out skating, you want to make sure that your inline skates fit comfortably. To ensure you have the best skating experience, here at SkatePro, we ...

Skateboard Wheels Guide

Skateboard wheels are important for your performance – whether you’re a beginner or a pro. They wield significant influence over your skating experien...

Compatibility of Bindings for Cross Country and Roller Skis

When buying equipment for cross country skis (also named nordic skiing) and roller skis, you have to ensure that the bindings and the footwear you cho...

How To Put On Skateboard Griptape

Most skaters put on their skateboard griptape themselves. Trying this for the first time can be tricky and requires some patience. In this guide, we w...

Buying kitesurfing gear

The most important gear in kitesurfing will be the kiteboard and the kite itself. Here you can find some useful information when you are deciding on a...

Skateboard Trucks Guide

Getting the best skateboard trucks will make a huge difference if you want to upgrade your setup. Skateboard trucks have a vital influence on the stab...

Buying a scooter deck

The scooter deck is what you stand on when riding. Changing the deck on a scooter is like changing the frame on a bicycle, you have to exchange all th...

Buying a SUP board

SUP, short for ‘stand-up paddling’, is one of the fastest growing water sports. If you are looking to get a board yourself, here are some points to co...

How to Install a BMX Pivotal Seat

In this video, we'll show you how to fit a BMX pivotal seat onto your setup: First, slide your seat post into the frame and lock it in place. Now,...

Buying scooter spacers

A wheel spacer is mounted between 2 bearings in a wheel. The idea of a spacer is to avoid too much pressure on the bearings when tightening the axle/b...

How to Install BMX Cranks

Learn how to get your BMX cranks installed by following the simple steps in our video: Start by greasing your crank's spindle and inserting it int...

How to Install Skateboard Bearings

Whether you have a brand new set or just need to reinsert them after a clean, all skaters will have to mount skateboard bearings at some point. Fortun...

Guide to Buying Skateboard Decks

Choosing the right skateboard deck is not rocket science, but it does require a bit of thought beyond finding the most appealing deck graphics. You ma...

Buying a Hockey Stick

If you are considering purchasing a new ice hockey or roller hockey stick, it is important to keep your level, height and style of play in mind. Hocke...

Hockey Stick Left or Right?

Usually, right-handed players use hockey sticks where the blade is to the left side of the body (a left blade), and left-handed players play with stic...

How to Put Scooter Grips On

If you’re wondering how to install scooter grips then you have come to the right place. In this video, we’ll show you how to put on scooter grips so t...

Buying axles for scooters

The axles on a scooter varies in size and shape according to brand and model. If the axle is not properly dialed the scooter will make noises and can ...

7 Easy Steps to Maintain your Ice Skates

Follow the 7 tips in this guide to prolong the lifespan of your ice skates in order for you to enjoy them for many years. Figure skates, as well as ic...

Guide to Buying Clamps for Scooters

Scooter clamps come in many shapes and sizes, and they play an integral role in your setup. If you are smart when choosing your scooter clamp, you can...

How to install BMX Tires and Inner Tubes

In this video, follow the steps to learn how to install BMX tires and an inner tube: First, inflate a bit of air into the inner tube. Be aware of the ...

How to Install BMX Pegs

Get ready to master ledge grinds with BMX pegs. If you're in any doubt about how to fit BMX pegs on your setup, then this video will show you how:...

Buying a scooter fork

Get ready for our comprehensive guide to buying pro scooter forks. We'll cover all the most important things to consider when deciding on a new fr...

Guide to buying roller derby skates

Preparing yourself for the "minimum skills" test? Or just in need of your first roller derby skates? Either way, you want to pay attention to size and...

Sharpening Ice Skates

The blade of your ice skates are being worn and dull when used, and it is recommended you have them sharpened every so often. Ice hockey skates Modern...

DIY : Bleach tie dye - create your own acid wash shirt

We all know that old school is the best school so who can resist the good, old, acid washed t-shirts. And the good news, you can do it all by yourself...

Buying scooter grips

Grips are mounted on your bar. Like on a bicycle, it's important to have full control of your bar. There are a lot of different models made of dif...

How to Install Skateboard Bushings

Need some help mounting your skate bushings? You've come to the right place. In this video, we will show you how to put on skateboard bushings in ...

How to Mount a BMX Sprocket Onto Your Cranks

In this video, we'll show you what you need to do to install your sprocket onto your BMX cranks: Start by mounting a sprocket adapter into the inn...

Buying Ski Boots

Finding the right ski boots is an important part of a good experience when skiing. This guide helps you to choose the ski boots that are right for you...

Mini BMX Assembling And Maintenance

Assembly and Maintenance Tips Rim- and tire wobble can appear, this is to be expected from standard tires and rims. These are primarily designed to be...

The Ultimate Snowboard and Ski Goggles Guide

Without a doubt, one of the most important accessories for your ski holiday is the ski goggles. You can also argue that a pair of good goggles is just...

Heat Molding Powerslide Boots

Thermo Forming of Boots SHMR-Technology SHMR is also known as Super Heat Moldable Resin. This new technology is used in modern race shoes. The shell c...

Buying a scooter brake

A brake is designed to slow you down or avoid an accident. Press gently on the brake while leaning your weight backwards on the scooter for optimal br...

How to Install Roller Skate Bearings

This video will show you how to install bearings in roller skate wheels. All you need is a skate tool and then you are good to go: Start by removing t...

How to Mount Skateboard Risers and Shock Pads

Installing skateboard riser pads is an easy way to prevent wheel bite when skating. Skateboard risers are inserted between the trucks and the deck giv...

Buying Frames for Aggressive Inline Skates

Frames can be replaced on most aggressive inline skates. Replace your frames in pairs when they are worn out due to grinds or if the corners of the wh...

How to Install BMX Grips

This video will show you how to install BMX grips: Spray a bit of alcohol-based window cleaner inside the grip. Now, slide the grip onto the bar. Make...

Buying a bodyboard

When you are ready to buy your bodyboard, there are many things you need to consider. Here you get a structured and concise guide on the most importan...

How to Install an SCS Adapter

SCS bar adapters are used to convert scooter bars with a slit to support SCS compression. Installing an SCS adapter to a scooter bar is relatively str...

Previous	Next
Page 2 paljaks 4