Bronson G3 Bearings 8-PackEUR 38,95 EUR 34,95
Speed Demons Bearings 8-PackEUR 14,95
Blood Orange Abec 7 Bearings 8-packEUR 16,95
Bones Race Reds Bearings 8-PackEUR 44,95
Mosaic Titanium Abec 7 Bearings 8-packEUR 29,95
Hydroponic Hy BearingsEUR 15,95
Bones Reds Bearings 8-PackEUR 24,95
Pig Bearings 8-PackEUR 26,95 EUR 24,95
Bronson G2 Bearings 8-PackEUR 22,95 EUR 20,95
Mosaic Abec 7 Bearings 8-packEUR 17,95 EUR 16,95
Bones Super Reds Bearings 8-packEUR 39,95
Bronson G3 Pro Bearings 8-PackEUR 38,95 EUR 37,95
Andale Blues Bearings 8-PackEUR 23,95 EUR 18,95
Primitive Skateboard Bearings 8-PackEUR 25,95 EUR 22,95
Bronson Ceramic Bearings 8-PackEUR 88,95
Enuff Skateboard Wheel Spacer 8mmEUR 0,95
Andale Carlos Ribeiro Pro Bearings 8-PackEUR 34,95 EUR 28,95
Jart Abec Bearings 8-packEUR 18,95 EUR 15,95
Andale Swiss X Diamond Bearings 8-PackEUR 59,95
Bones Reds Big Balls Bearings 8-PackEUR 29,95
Bronson Raw Bearings 8-PackEUR 49,95
Hydroponic Hy Bearings incl. SpacersEUR 23,95
Andale Swiss Tin Box Bearings 8-PackEUR 54,95 EUR 37,95
Bones Reds BearingEUR 2,95
Essentials Bearings 8-PackEUR 14,95
KFD Eight Balls BearingsEUR 14,95
Mosaic Abec 5 Bearings 8-packEUR 14,95 EUR 12,95
Andale Abec 7 Bearings 8-PackEUR 24,95 EUR 22,95
Sk8mafia Abec 7 Bearings 8-PackEUR 20,95 EUR 18,95
Enjoi 7-Teenish Bearings 8-PackEUR 19,95
Andale Swiss Tin Box BearingsEUR 64,95
Surf the Streets Smoothly With Surfskate Bearings
A good set of bearings is key to having a smooth riding experience when out on your surfskate. Most bearings are measured on the ABEC scale, which assesses for precision and accuracy of the bearing. The ABEC scale is measured from 1 to 9, with the higher the number, the greater the degree of precision. Bearings are typically made from steel or ceramics.
How Do You Clean Surfskate Bearings?
First, use your skate tool to remove the wheels from the trucks and then take the bearings out of the wheels. Once you have done this, you’ll now need to remove the rubber shields using a sharp edge like a knife.
Now, place the bearings in either a jar or a specific bearing cleaner that contains the alcohol or acetone solution. Then, shake the jar for around 10 seconds or until you can see the solution getting dirty. Next, remove the bearings and let them dry. To check that they are clean, give them a spin. Spinning smoothly? Finally, you need to lubricate them with some bearing oil. You are now ready to put your setup back together and get riding.
To make sure that you’ve got the right tools to clean your bearings, head over to our Surfskate Tools page.